bufTooSmall = -243

synthNotReady = -242

synthOpenFailed = -241

noSynthFound = -240

siUnknownQuality = -232 •invalid quality selector (returned by driver)

siUnknownInfoType = -231 •invalid info type selector (returned by driver)

siInputDeviceErr = -230 •input device hardware failure

siBadRefNum = -229 •invalid input device reference number

siBadDeviceName = -228 •input device could not be opened

siDeviceBusyErr = -227 •input device already in use

siInvalidSampleSize = -226 •invalid sample size

siInvalidSampleRate = -225 •invalid sample rate

siHardDriveTooSlow = -224 •hard drive too slow to record to disk

siInvalidCompression = -223 •invalid compression type

siNoBufferSpecified = -222 •returned by synchronous SPBRecord if nil buffer passed

siBadSoundInDevice = -221 •invalid index passed to SoundInGetIndexedDevice

siNoSoundInHardware = -220 •no Sound Input hardware

noMoreRealTime = -212 •not enough CPU cycles left to add another task

channelNotBusy = -211

buffersTooSmall = -210 •can not operate in the memory allowed

channelBusy = -209 •the Channel is being used for a PFD already

badFileFormat = -208 •was not type AIFF or was of bad formatcorrupt

notEnoughBufferSpace = -207 •could not allocate enough memory

badFormat = -206 •Sound Manager Error Returns

badChannel = -205 •Sound Manager Error Returns

resProblem = -204 •Sound Manager Error Returns

queueFull = -203 •Sound Manager Error Returns

pictureDataErr = -11005 •the picture data was invalid

colorsRequestedErr = -11004 •the number of colors requested was illegal

cantLoadPickMethodErr = -11003 •unable to load the custom pick proc

pictInfoVerbErr = -11002 •the passed verb was invalid

pictInfoIDErr = -11001 •the internal consistancy check for the PictInfoID is wrong

pictInfoVersionErr = -11000 •wrong version of the PictInfo structure

updPixMemErr = -125 •insufficient memory to update a pixmap

rgnTooBigErr = -500

cDepthErr = -157 •invalid pixel depth

cResErr = -156 •invalid resolution for MakeITable

cDevErr = -155 •invalid type of graphics device

cProtectErr = -154 •colorTable entry protection violation

cRangeErr = -153 •range error on colorTable request

cNoMemErr = -152 •failed to allocate memory for structure

cTempMemErr = -151 •failed to allocate memory for temporary structures

cMatchErr = -150 •Color2Index failed to find an index

1)evtNotEnb •event not enabled at PostEvent
2)dsBusError •bus error
3)siInitSDTblErr •slot int dispatch table could not be initialized
4)cmRejected
5)ftRejected
6)cdevResErr •Couldn't get a needed resource; alert
7)kGSpDeviceError_NoMoreModes
8)tmNotSent

1)insufficientStackErr
2)nsStackErr = -149

pixMapTooDeepErr = -148

1)rgnOverflowErr
2)rgnTooBigError = -147

noMemForPictPlaybackErr = -145

badExtResource = -185 •extended resource has a bad format

CantDecompress = -186 •resource bent ('the bends') - can't decompress a compressed resource

mapReadErr = -199 •map inconsistent with operation

resAttrErr = -198 •attribute inconsistent with operation

rmvRefFailed = -197 •RmveReference failed

rmvResFailed = -196 •RmveResource failed

addRefFailed = -195 •AddReference failed

addResFailed = -194 •AddResource failed

resFNotFound = -193 •Resource file not found

resNotFound = -192 •Resource not found

inputOutOfBounds = -190 •Offset of Count out of bounds

writingPastEnd = -189 •Writing past end of file

resourceInMemory = -188 •Resource already in memory

memLockedErr = -117 •trying to move a locked block (MoveHHi)

memSCErr = -116 •Size Check failed

memBCErr = -115 •Block Check failed

memPCErr = -114 •Pointer Check failed

memAZErr = -113 •Address in zone check failed

memAdrErr = -110 •address was odd; or out of range

memPurErr = -112 •trying to purge a locked or non-purgeable block

memWZErr = -111 •WhichZone failed (applied to free block)

nilHandleErr = -109 •Master Pointer was NIL in HandleZone or other

1)memFullErr
2)iMemFullErr •Not enough room in heap zone = -108

1)memROZWarn •soft error in ROZ
2)memROZError •hard error in ROZ
3)memROZErr •hard error in ROZ = -99

portNotCf = -98 •driver Open error code (parameter RAM not configured for this connection)

portInUse = -97 •driver Open error code (port is in use)

portNotPwr = -96 •serial port not currently powered

excessCollsns = -95 •excessive collisions on write

lapProtErr = -94 •error in attaching/detaching protocol

noBridgeErr = -93 •no network bridge for non-local send

1)eMultiErr •Multicast address error ddpSktErr
2)ddpSktErr •error in soket number = -91

1)eLenErr •Length error ddpLenErr
2)ddpLenErr •data length too big = -92

noTypeErr = -102 •No object of that type in scrap

noScrapErr = -100 •No scrap exists error

breakRecd = -90 •Break received (SCC)

rcvrErr = -89 •SCC receiver error (framing; parity; OR)

prInitErr = -88 •InitUtil found the parameter ram uninitialized

prWrErr = -87 •parameter ram written didn't read-verify

clkWrErr = -86 •time written did not verify

clkRdErr = -85 •unable to read same clock value twice

fmt2Err = -83 •can't get enough sync

fmt1Err = -82 •can't find sector 0 after track format

sectNFErr = -81 •sector number never found on a track

seekErr = -80 •track number wrong on address mark

spdAdjErr = -79 •unable to correctly adjust disk speed

twoSideErr = -78 •tried to read 2nd side on a 1-sided drive

initIWMErr = -77 •unable to initialize IWM

tk0BadErr = -76 •track 0 detect doesn't change

cantStepErr = -75 •step handshake failed

wrUnderrun = -74 •write underrun occurred

badDBtSlp = -73 •bad data mark bit slip nibbles

badDCksum = -72 •bad data mark checksum